Deutz Engine 914. F4L 914, F6L 914

Deutz Engine 914. F4L 914, F6L 914

The Genset Engine.

http://www.largesupplier.com/products/showproductsdetail/40

The engine with integrated cooling system.
These are the characteristics of the 914 Gen:
4 and 6-cylinder naturally aspirated engines.
Displacement: 1.1 l/cylinder.
Unit construction system with individual cylinders.
Advanced injection and combustion system.
Electronic governor (GAC) as option.
Worldwide proven: Over 3.0 million engines in service.
Only a few service points.
Powerful and compact, low weight.
Your benefits:
u Space-saving and cost-effective installation due to minimum weight
and small space requirement.
u High quality combined with highly matured, simple configuration.
u Low maintenance requirements together with legendary durability.
u Outstanding load acceptance ensures immediate power supply.
u Worldwide service network with over 1,000 locations.
u Geared to the future since optionally European and US American
exhaust emission standards of level II are fulfilled.

Engine type		D 2008 L3	D 2008 L4
Speed	min-1 | rpm	1500	1500
Frequency	Hz	50	50
Engine/genset ratings 1)
Continuous power, ICN (COP)2)	kW | hp	41,0 | 55.0	62,0 | 83.1
Prime power, ICN (PRP)3)	kW | hp	43,0 | 57.6	65,0 | 87.2
Limited-time running power, IFN (LTP)4)	kW | hp	45,5 | 61.0	68,5 | 91.6
Typical generator power output
Typical generator power output (COP)5)	kVA	45	70
Typical generator power output (PRP)5)	kVA	45	70
Typical generator power output (LTP)5)	kVA	50	75
Typical generator power output
100 % load	g/kWh | lb/hp		204 | 0.330
75 % load	g/kWh | lb/hp		205 | 0.332
50%load	g/kWh | lb/hp		220 | 0.356
25%load	g/kWh | lb/hp		315 | 0.510

Deutz Engine

Deutz Engine  D 2008, D 2008 L3, D 2008 L4

Engine type		D 2008 L3	D 2008 L4
Number of cylinders		3	4
Bore/stroke	mm	76/86 | 2.99/3.39	76/86 | 2.99/3.39
Displacement	l	1.17 | 71	1.56 | 95
Compression	ratio	23.5 : 1	23.5 : 1
Max. rated speed	min- 1	3000	3000
Mean piston speed	m/s	8.6 | 1693	8.6 | 1693
EU Stage III A / US-EPA Tier 3 / Tier 4 interim power ratings for mobile construction machines1)
Power acc. to ISO 14396	kW | hp	20 | 27	27 | 36
at speed3)	min- 1	3000	3000
Mean effective pressure	bar	6.8 | 99	6.9 | 100
Max. torque	Nm	71 | 52	95 | 70
at speed	min- 1	2000	2000
Minimum idle speed	min- 1	900	900
Specific fuel consumption5)	g/kWh	243 | 0.4	245 | 0.4
Weight to DIN 70020, Part 7A6	kg	155 | 342	189 | 417

Deutz Engine 912. F3L912, F4L912, F5L912, F6L912

  Deutz Engine

912. F3L912, F4L912, F5L912, F6L912

The engine for construction equipment.

E Technical data

Engine type		F3L912	F4L912	F5L912	F6L912
Number of cylinders		3	4	5	6
Bore/stroke	mm	100/120	100/120	100/120	100/120
Displacement	l	2.83	3.77	4.71	5.66
Compression	ratio	18	18	18	18
Max. rated speed	min- 1	2500	2500	2500	2500
Mean piston speed	m/s	10	10	10	10
Power ratings for construction equipment engines1)
Power ratings for automotive engines2)	kW	40	54	68	82
at speed3)	min- 1	2500	2500	2500	2500
Mean effective pressure	bar	6.79	6.88	6.93	6.96
Power ratings for industrial engines4) highly intermittent operation	kW	40	54	68	82
at speed	min- 1	2500	2500	2500	2500
Mean effective pressure	bar	6.79	6.88	6.93	6.96
intermittent operation4)	kW	38	51	65	78
at speed	min- 1	2500	2500	2500	2500
Mean effective pressure	bar	6.50	6.62	6.45	6.62
Max. torque	Nm	185	247	308	370
at speed	min- 1	1450	1450	1450	1450
Minimum idle speed	min- 1	650	650	650	650
Specific fuel consumption5)	g/kWh	225	225	225	225
Weight to DIN 70020, Part 7A6	kg	270	300	380	410

Pelumas Nynas

Pelumas Nynas

 


Nynas Transformer Oils

Nynas Standard Grade Product
Nynas Nytro Bear ( ASTM D 3487)
Nynas Nytro Izar I ( ASTM D3487)
Nynas Nytro Izar II ( ASTM D3487)
Nynas Nytro Libra ( IEC 60296/ 03)
Nynas Nytro Taurus ( IEC 60296/ 03)
Nynas Nytro 11GBX – US ( ASTM D 3487)
Nynas High Grade Product
Nynas Nytro Gemini X ( IEC 60296/ 03)
Nynas Nytro Lynx ( ASTM D 3487)
Nynas Nytro Lyra X ( IEC 60296/ 03)
Nynas Nytro Orion I ( ASTM D 3487)
Nynas Nytro Orion II ( ASTM D 3487)
Nynas Super Grade Product
Nynas Nytro 10XN ( IEC 60296/ 03)
Nynas Nytro 10XN ( ASTM D 3487)
Nynas Nytro 4000A ( IEC 60296/ 03)
Nynas Nytro 4000X ( IEC 60296/ 03)

Pelumas Total

Pelumas Total

HEAT TRANSFER SYSTEM CLEANER.

1 SERIOLA D TH
EXTREME-PRESSURE WATER RESISTANT HIGH TEMP CALCIUM SULFONATE COMPLEX GREASE.
2 CERAN HV
3 CERAN WR 2
4 CERAN PM.
SYNTHETIC ELECTRICAL INSULATING OIL
5 ISOLEC KL 2-3
ENGINE OIL
6 RUBIA G 17 SAE 40
7 RUBIA TIR 8600 CI 10W-40.
REFRIGERATING OIL
8 LUNARIA KT 32
9 LUNARIA KT 46
10 REFRA NH 68
LITHIUM GREASE NLGI 0-3 – STANDARD APPLICATION
11 MULTIS EP 0A
12 MULTIS EP 00A
13 MULTIS EP 2A
14 MULTIS EP 3A
LITHIUM COMPLEX GREASE NLGI 2-HIGH PERFORMANCE
15 MULTIS COMPLEX EP 2A
16 MULTIS COMPLEX EP 3A
17 MULTIS COMPLEX MS 2
POLYUREA GREASE – HIGH SPEED APPLICATION
18 ALTIS EM 2.
FOOD GRADE GREASE
19 AXA GR 1
ENGINE COOLANT CONCENTRATE
20 HI-CONCENTRATE COOLANT
HI VI HYDRAULIC OIL
21 EQUIVIS ZS 32
SYNTHETIC GEAR OIL
22 CARTER SY 220
OPEN GEAR OIL
23 CARTER ENS/ EP 700
SYNTHETIC COMPRESSOR OIL
24 DACNIS SE 68
25 DACNIS SE 100
26 DACNIS SH 46
MINERAL SCREW COMPRESSOR OIL
27 DACNIS VS 32
28 DACNIS VS 46
29 DACNIS VS 68
RECIPROCATING COMPRESSOR OIL
30 DACNIS P 68
31 DACNIS P 100
32 DACNIS P 150
MACHINE TOOL OIL
33 DROSERA MS 68
34 DROSERA MS 220
MINERAL HYDRAULIC OIL
35 AZOLLA ZS 22
SYNTHETIC FOODGRADE LUBRICATING OIL
36 NEVASTANE SL 220
MINERAL INSULATING OIL
37 ISOVOLTINE II
HEAT TRANSFER FLUID
38 SERIOLA 3120
39 SERIOLA 1510
40 SERIOLA 100
TURBINE OIL
41 PRESLIA 32
42 PRESLIA 46
43 PRESLIA 68
44 PRESLIA 100
ENGINE OIL
45 RUBIA ST 415
46 RUBIA ST 420
47 RUBIA S 30 CF
48 RUBIA S 40 CF
49 RUBIA S 50 CF
50 RUBIA TIR 6600 15W/ 40 CH4
51 RUBIA TIR 7400 15W/ 40 CI4
52 RUBIA XT 15W/ 40 CF4
53 RUBIA XT 20W/ 50 CF4
TRANSMISSION OIL
54 ATF DEXRON III
55 TRANSMISSION TM 80W/ 90
56 TRANSMISSION TM 85W/ 140
MINERAL HYDRAULIC OIL
57 AZOLLA ZS 32
58 AZOLLA ZS 46
59 AZOLLA ZS 68
60 AZOLLA ZS 100
HI VI HYDRAULIC OIL
61 EQUIVIS ZS 46
62 EQUIVIS ZS 68
MINERAL GEAR OIL
63 CARTER EP 68
64 CARTER EP 100
65 CARTER EP 150
66 CARTER EP 220
67 CARTER EP 320
68 CARTER EP 460
69 CARTER EP 680
GAS ENGINE OIL
70 NATERIA MH 40
71 NATERIA MJ 40

Pelumas Gulf

Pelumas Gulf

GULF SUPER FLEET SPECIAl.
GULF SUPER FLEET SP.
GULF SUPER FLEET SPECIAL AP CH 4, SAE 15W- 40.
GULF SUPER FLEET SPECIAL AP CH 4, SAE 15W- 40.
GULF SUPER DIESEL PLUS API CF4 SAE 15W- 40.
GULF SUPER DIESEL PLUS API CF4 SAE 15W- 40.
GULF SUPER DUTY MOTOR API CF4 SAE 15W- 40.
GULF SUPER DUTY PLUS SAE 30 API CF.
GULF SUPER DUTY PLUS SAE 40 API CF.
GULF SUPER DUTY PLUS SAE 40 API CF.
GULF SUPER DUTY PLUS 50, CE

AUTOMATIC GEAR & TRANSMISSION FLUIDS.
GULF ATX DX 3.
GULF ATX DX 3.
GULF GEAR MP 90, GL- 5.
GULF GEAR MP 90, GL- 5.
GULF GEAR MP 140, GL- 5
GULF GEAR MP 140, GL- 5.
GULF GEAR MP API GL- 5,
SAE 80 W 90.
GULF GEAR MP API GL- 5, SAE 80 W 90.
GULF GEAR MP API GL- 5, SAE 80 W 140.
GULF GEAR MP API GL- 5, SAE 80 W 140.

TURBIN & HYDRAULICS OIL.
GULF HARMONY ISO VG 32.
GULF HARMONY ISO VG 46.
GULF HARMONY ISO VG 68 GULF HARMONY ISO VG 100
GULF HARMONY AW ISO VG 32.
GULF HARMONY AW ISO VG 32
GULF HARMONY AW ISO VG 46
GULF HARMONY AW ISO VG 46
GULF HARMONY AW ISO VG 68
GULF HARMONY AW ISO VG 68
GULF HARMONY AW ISO VG 100.
GULF HARMONY HV ISO VG 46 GULF HARMONY HV ISO VG 68
GULF CREST 32, DIN 51515, BS 489
GULF CREST 46, DIN 51515, BS 489
GULF CREST 68, DIN 51515, BS 489

INDUSTRIAL GEAR OIL
GULF EP LUBRICANTS HD 100
GULF EP LUBRICANTS HD 150
GULF EP LUBRICANTS HD 220
GULF EP LUBRICANTS HD 100
GULF EP LUBRICANTS HD 150
GULF EP LUBRICANTS HD 220
GULF EP LUBRICANTS HD 320
GULF EP LUBRICANTS HD 460
GULF EP LUBRICANTS HD 320
GULF EP LUBRICANTS HD 460
GULF EP LUBRICANTS HD 680

COMPRESOR & REFRIGERATION OILS
GULF ESKIMO 32
GULF ESKIMO 46
GULF ESKIMO 68
GULF COMPRESSOR OIL 32
GULF COMPRESSOR OIL 32
GULF COMPRESSOR OIL 68
GULF COMPRESSOR OIL 68
GULF COMPRESSOR OIL S 46
GULF COMPRESSOR OIL S 46
GULF COMPRESSOR OIL S 100

MARINE & RAILROAD PRODUCT
GULFMAR SELECT 420
GULFMAR SELECT 430
GULFMAR SELECT 440
GULFMAR DPO 412

PROCESSIG OIL
GULF WAY 68, ISO VG 68
GULF WAY 220, ISO VG 220
GULF THERM 32, ISO VG 32
GULF THERM 46, ISO VG 46
GULF ROCK DRILL 100
GULF ROCK DRILL 150
GULF ROCK DRILL 220
GULF ROCK DRILL 320

GULF SOLUBLE CUTTING DRILL OIL GREASE
GULF CHASSIS GREASE # 2
GULF CHASSIS GREASE # 2
GULF CROWN GREASE # 2
GULF CROWN GREASE # 2
GULF CROWN GREASE # 3
GULF CROWN GREASE # 3
GULF CROWN EP GREASE # 0
GULF CROWN EP GREASE # 0
GULF CROWN EP GREASE # 1
GULF CROWN EP GREASE # 2
GULF CROWN EP GREASE # 2
GULF CROWN EP GREASE # 3
GULF CROWN EP GREASE # 3
GULF CROWN LC 2
GULF CROWN LC 2
GULF CROWN LC 3
GULF CROWN LC 3
GULF CROWN HT GREASE # 2
GULF CROWN HT GREASE # 2
GULF FLEX MOLY EP 2
GULF FLEX MOLY EP 2
GULF CROWN CS 2
GULF CROWN CS 2
TRANSFORMER OIL
TRANSFORMER OIL A
TERSEDIA JUGA UNTUK OLI :

ENGINE OIL
GEARBOX OIL
HYDRAULIC OIL
ADDITIVE DAN OTHER
GREASES

BP

BP

 
TRANSMISSION OILS and FLUIDS.
1 AUTRAN GM-MP.
2 HYPOGEAR 90 EP.
3 HYPOGEAR 140 EP
4 HYPOGEAR 80W-90EP GL5.
5 HYPOGEAR 85W-140EP GL5.
6 TERRAC SUPER.
TRANSMISION 9. HYDRAULIC OILS..
7 BARTRAN HV 32, 46, 68
8 ENERGOL HLP 32, 46, 68, 100
9 ENERGOL HLP 150
10 ENERSYN SF-C 15

METAL WORKING FLUID
11 CILORA 123
12 CILORA 211
13 ENERGOL GF 720

MORGOIL BEARING OILS
14 ENERGOL MGX 88
15 ENERGOL MGX 220
16 ENERGOL MGX 320
17 ENERGOL MGX 460

SPECIALTIES OILS
18 ENERGOL GR 3000-2
19 ENERGOL RD-E 100
20 ENERGOL WM 2
21 ENERGOL WM 4
22 ENERGOL WM 6
23 MACCURAT D 68
24 MACCURAT D 220
25 TRANSCAL N

INDUSTRIAL GEAR OILS
26 ENERGEAR LIMSLIP 90
27 ENERGOL GR-XP 68
28 ENERGOL GR-XP 100
29 ENERGOL GR-XP 150
30 ENERGOL GR-XP 220
31 ENERGOL GR-XP 320
32 E-XP 320
43 ENERSYN SG-XP 460

CIRCNERGOL GR-XP 460
33 ENERGOL GR-XP 680
34 ENERGOL GR-XP 1000

SYNTHETIC GEAR OILS
35 ENERSYN HTX 68
36 ENERSYN HTX 150
37 ENERSYN HTX 220
38 ENERSYN HTX 320
39 ENERSYN HTX 460
40 ENERSYN EPX 680
41 ENERSYN SG-XP 220
42 ENERSYN SGULATING OILS
44 SPEMO HB 680

COMPRESSOR OILS
45 ENERGOL LPT 15, 32, 68
46 ENERGOL RC 68
47 ENERGOL RC 100
48 ENERGOL RC 150
49 ENERGOL RC-R 4000 – 32, 46, 68

SYNTHETIC COMPRESSOR OILS
50 ENERSYN LPS 46
51 ENERSYN LPS-PO 68
52 ENERSYN RC-S 32
53 ENERSYN RC-S 46
54 ENERSYN RC-S 68

TURBINE OILS
55 ENERGOL THB 32, 46, 68
56 ENERGOL THB 100
57 TURBINOL X 46

ENGINE OILS
58 VANELLUS C3 30 CF/ SF
59 VANELLUS C3 40 CF/ SF
60 VANELLUS V3 EXTRA CH-4

GREASES
61 ENERGREASE HTG 2
62 ENERGREASE L 21 M
63 ENERGREASE LC 2
64 ENERGREASE LS 2
65 ENERGREASE LS 3
66 ENERGREASE LS EP 0
67 ENERGREASE LS EP 1, 2
68 MINE GREASE LM EP 680

MOBIL OIL

MOBIL OIL

 
MOBIL OIL AND LUBRICANT

VACTRA 1 208LT DR.
VACTRA 2 208LT DR
VACTRA 3 208LT DR.
VACTRA 4 208LT DR.

SYNTHETIC OIL

SHC 22M 55GA DR ( 208LT) DRUM

METAL
SHC 46M 55GA DR ( 208LT) DRUM
SHC 824 55GA DR ( 208LT) DR
SHC PM 380 208LT DR
SHC 624 55GA DR ( 208LT) DR
SHC 626 55GA DR ( 208LT) DR
SHC 629 55GA DR ( 208LT) DR
SHC 630 55GA DR ( 208LT) DR
SHC 632 55GA DR ( 208LT) DR
SHC 634 55GA DR ( 208LT) DR
SHC 636 55GA DR ( 208LT) DR
SHC 639 55GA DR ( 208LT) DR
GEAR SHC 150 181LT DR
GEAR SHC 220 181LT DR
GEAR SHC 320 181LT DR
GEAR SHC 460 181LT DR
GEAR SHC 680 181LT DR
GEAR SHC 1000 181LT DR
GEAR SHC 3200 1LT DR
GEAR SHC 6800 181LT DR
GEAR SHC XMP 320 208LT DR
GEAR SHC XMP 460 208LT DR
GLYGOYLE 11 208LT DR
GLYGOYLE 22 208LT DR
GLYGOYLE 30 208LT DR
GLYGOYLE HE 320 208LT DR
GLYGOYLE HE 460 208LT DR
GLYGOYLE HE 680 208LT DR
GLYGOYLE ARCHTIC SHC 226E DR 208L
GLYGOYLE ARCHTIC SHC 230E DR 208L
EAL 224H 55GA 208LT DR
RARUS 827 208LT DR
RARUS 829 208LT DR
RARUS SHC 1024 208LT DR
RARUS SHC 1025 208LT DR
RARUS SHC 1026 208LT DR
RAROLUBE 830 208LT DR
GAS COMPRESSOR OIL 208LT DR
LITH SHC 100 384LB 174KG DR
LITH SHC 460 384LB 174KG DR
MOBIL GLYGOYLE 100, 208LT
MOBIL GLYGOYLE 150, 208LT
MOBIL GLYGOYLE 220, 208LT
MOBIL GLYGOYLE 320, 208LT
MOBIL GLYGOYLE 460, 208LT
SPINDEL OIL
VELOCITE 3 208LT DR
VELOCITE 6 208LT DR
VELOCITE 10 20
8LT DR

CIRCULATING OIL

DTA EXTRA HEAVY, 208LT DR
DTA AA 208LT DR
DTA BB 208LT DR
VACUOLINE 133, 208LT DR
VACUOLINE 137, 208LT DR
VACUOLINE 525, 208LT DR
VACUOLINE 528, 208LT DR
VACUOLINE 533, 208LT DR
VACUOLINE 537, 208LT DR
VACUOLINE 546, 208LT DR
VACUOLINE 1405, 208LT DR
VACUOLINE 1409, 208LT DR
VACUOLINE 148, 208LT DR

INDUSTRIAL GEAR OIL

GEAR 626 208LT DR
GEAR 627 208LT DR
GEAR 629 208LT DR
GEAR 630 208LT DR
GEAR 632 208LT DR
GEAR 634 208LT DR
GEAR 636 208LT DR
MISTLUBE 30 208LT DR
MISTLUBE 32 208LT DR
GEAR OGL 007 180 KG DR
MOBIL GEAR XMP 220 208LT DR
MOBIL GEAR XMP 320 208LT DR
MOBIL GEAR XMP 460 208LT DR
TAC 375NC 400LB ( 181KG) DR
TFF MT GEAR OIL 80W
ESSO JWS 2326, 208LT
TFF ATF T- IV ( JWS 3309) , 209LT
600W SUPER CYLINDER OIL 208LT DR
NYVAC FR200D 208LT DR
PYROTEC HFD 46 230KG DR
MOBIL GEAR 600 XP 68, 208 LT, DR
MOBIL GEAR 600 XP 100, 208 LT, DR
MOBIL GEAR 600 XP 150, 208 LT, DR
MOBIL GEAR 600 XP 220, 208 LT, DR
MOBIL GEAR 600 XP 320, 208 LT, DR
MOBIL GEAR 600 XP 460, 208 LT, DR
MOBIL GEAR 600 XP 680, 208 LT, DR

COMPRESSOR OIL

RARUS 424 208LT DR
RARUS 425 208LT DR
RARUS 426 208LT DR
RARUS 427 208LT DR
RARUS 429 208LT DR
METAL WORKING FLUID
ARMA 798 50GA

HIDRAULIC OIL

DTE 21, 208LT, DR
DTE 24, 208LT, DR
DTE 25, 208LT, DR
DTE 26, 208LT, DR
DTE 27, 208LT, DR
DTE 11M, 208LT DR MET
DTE 13M, 208LT DR MET
DTE 15M, 208LT DR MET
DTE 16M, 208LT DR MET
DTE 18M, 208LT DR MET
DTE 19M, 208LT DR MET
DTE EXCEL 32, 208LT, DR
DTE EXCEL 46, 208LT, DR
DTE EXCEL 68, 208LT, DR
MOBIL HYDRAULIC 10W, 208LT

TURBINE OIL

DTE LIGHT 208LT DR
DTE MEDIUM 208LT DR
DTE HEAVY MEDIUM 208LT DR
DTE HEAVY 208LT DR
DTE 798 OIL 208LT DR
DTE 732 208LT DR
DTE 746 208LT DR
DTE 768 208LT DR
DTE 832 208LT DR
DTE 208LT DR
TERESSTIC T 32 208LT DR
TERESSTIC T 46 208LT DR
TERESSTIC T 68 208LT DR
TERESSTIC T 100 208LT DR
TERESSTIC 150 208LT DR
TERESSTIC 220 208LT DR
TERESSTIC 320 208LT DR
TERESSTIC 460 208LT DR
TERESSTIC N 150 208LT DR
TERESSTIC N 220 208LT DR
PAPER MACHINE OIL
DTE PM 220 208LT DR

REFRIGERATION OIL
GARGOYLE ARTIC 155 D 208L
GARGOYLE ARTIC 300 D 208L
HEAT TRANSFER OIL
THERM 603 208LT DR
THERM 605 208LT DR

INDUSTRIAL OILS
ALMO 527 208LT DR
ALMO 529 208LT DR

AVIATION OIL

JET OIL II, 55GA ( 208LT) DRUM, METAL
JET OIL II, 24XQT, CTN/ CANS, METAL

GAS ENGINE OIL

PEGASUS 610, 208LT, DR
PEGASUS 710, 208LT, DR
PEGASUS 801, 208LT, DR
PEGASUS 805, 208LT, DR
PEGASUS 905, 208LT, DR
MOBIL GARD 300, 200LT, DR
MOBIL GARD 312, 200LT, DR
MOBIL GARD 412, 200LT, DR
MOBIL GARD 512, 200LT, DR
MOBIL GARD M330 208LT, DR
MOBIL GARD M430 208LT, DR
MOBIL GARD M440 208LT, DR
MOBIL GARD 450 NC 208LT, DR
MOBIL GARD M50 208LT, DR
MOBIL GARD SP 55, 208LT, DR
MOBIL GARD 570, 208LT, DR
MOBIL GARD ADL 40, 208LT, DR
MOBIL GARD HSD, 208LT, DR
MOBIL GARD HSHC 208LT, DR

GREASES

LUX EP 0, 180 KG, DRUM
LUX EP 1, 180 KG, DRUM
LUX EP 2, 180 KG, DRUM

SHELL

SHELL

 
DIESEL ENGINE OIL.

1 SHELL ALEXIA 50
2 SHELL ARGINA S 30/ S 40
3 SHELL ARGINA T 30/ T 40.
4 SHELL ARGINA X 40.
5 SHELL ARGINA XL 40
6 SHELL GADINIA 30/ 40
7 SHELL MELINA 30/ 40
8 SHELL CAPRINUS HD 40

HIDRAULIC OIL
1 SHELL TELLUS 32/ 46/ 68/ 100
2 SHELL TELLUS T 32/ T 46/ T 68
3 SHELL MORLINA 10/ 22/ 32
4 SHELL MORLINA 100/ 50/ 220/ 320
5 SHELL MORLINA T 100
6 SHELL MORLINA T 460

GEAR AND BEARING OIL
1 SHELL OMALA 68/ 100/ 150/ 220
2 SHELL OMALA 320/ 460/ 680
3 SHELL OMALA 1000
4.SHELL OMALA F 220/ F 320/ F 160
5.SHELL OMALA HD 220/ 320/ 460/ 680
6 SHELL VALVATA J 46 C
7 SHELL CARDIUM COMPOUND 200
8 SHELL TIVELA S 220/ S 320

COMPRESSOR OIL.
1 SHELL CORENA AS 32/ AS 46
2 SHELL CORENA AS 68
3 SHELL CORENA P 68/ P 100
4 SHELL CORENA P 150
5 SHELL CORENA S 46/ 68
6 SHELL CLAVUS 32/ 46/ 68
7 SHELL CLAVUS G 68
8 SHELLL CLAVUS AB 68

HEAT TRANSFER OIL
1 SHELL THERMIA B

CUTING MESIN OIL
1 SHELL DROMUS B
2 SHELL TONNA T 32/ T 68
3 SHELL TONNA T 220

TURBIN OIL
1 SHELL TURBO T 32, 46, 68
2 SHELL TURBO T 32
3 SHELL TURBO N. 32
4 SHELL TURBO CC 46
5 SHELL GT EP 32
6 SHELL MYSELLA R30, R40
7 SHELL MYSELLA LA 40

GREASES.
1 SHELL ALBIDA EP 2
2 SHELL ALBIDA HD X 3
3 SHELL ALBIDA MDX 2
4 SHELL ALVANIA EP ( LP) 0
5 SHELL ALVANIA EP ( LP) 1
6 SHELL ALVANIA EP ( LP) 2
7 SHELL ALVANIA RL 2/ RL 3
8 SHELL DARINA R2
9 SHELL MALLEUS GL 400/ 500
10 SHELL MALLEUS OGH

ELECTRIC OIL
1 SHELL DIALLA B

PNEMUATIC OIL
1 SHELL TORCULA 100
SMALL PACK ( PAIL) GEAR & BEARING OIL ( PAIL
1 SHELL TIVELA S 150/ S 220
COMPRESSOR OIL ( PAIL)
1 SHELL CORENA AP 100
2 SHELL CORENA AS 32/ 66
3 SHELL CORENA P 68/ P 100
4 SHELL CORENA S 6B

GREASE ( PAIL)
1 SHELL ALBIDA PPS GRS
2 SHELL ALVANIA EP ( LF) 1
3 SHELL ALVANIA EP ( LF) 2
4 SHELL ALVANIA RL 2/ RL 3
5 SHELL STAMINA RL 2
6 SHELL STAMINA RL 2 ( 045 X 12)
7 SHELL MALLEUS E12
8 SHELL TIVELA GL 00

FOOD GRADE
1 SHELL CASSIDA HF 45
2 SHELL CASSIDA HF 68
3 SHELL CASSIDA GL 220
4 SHELL CASSIDA CR 40
5 SHELL CASSIDA DC 30
6 SHELL CASSIDA VP 100
7 SHELL CASSIDA GREASE RLS 0
8 SHELL CASSIDA GREASE RLS 2
9 SHELL CASSIDA GREASE HDS 2
10 SHELL CASSIDA GREASE HDS 2
11 SHELL FM GEAR OIL 220
12 SHELL FM HYDRAULIC 46
13 SHELL FM HYDRAULIC 66
14 SHELL FM HEAT TRANSFER 01

TRANSPORT PRODUCT DIESEL ENGINE OIL
1 SHELL RIMULA R2 10W ( CF/ TBN10 ex. D10W)
2 SHELL RIMULA R2 30( CF/ TBN10) ex. D30
3 SHELL RIMULA R2 40( CF/ TBN10) ex. D40
4 SHELL RIMULA R2 50( CF/ TBN40) ex. D50
5 SHELL RIMULA R2 EXTRA
15W- 40( CF) ex. 15W- 40
6 SHELL RIMULA R3 40 ( CF) ex. 40
7 SHELL RIMULA R3 X 15W- 40 ( CH4) ex. 15W- 40
8 SHELL RIMULA R4 15W- 40 ( CI- 4/ DH1) ex. SPR 15W- 40
9 SHELL RIMULA R3 MV 15W- 40 ex. MV 15W- 40
10 SHELL ROTELLA DD 40

GEAR OIL
1 SHELL SPIRAX G 80W- 90 ( GL- 4)
2 SHELL SPIRAX G 90
3 SHELL SPIRAX A 85W- 140 ( GL- 5)
4 SHELL SPIRAX A 90( GL- 5)
5 SHELL SPIRAX A 140 ( GL- 5)
6 SHELL SPIRAX 80W 90

GREASES
1 SHELL RETINAX EP 2
2 SHELL RETINAX LX 3

SPECIALTY
1 SHELL DONAX TX
2 SHELL DONAX TC 30
3 SHELL DONAX TC 50
4 SHELL DONAX TC 60
5 SHELL DT 10W- 30
6 SHELL TEQUILA V 32

DIESEL ENGINE OIL

1 SHELL REMULA R3 X 15W- 40 ( CH- 4) ex. X 15W- 40

GEAR OIL

1 SHELL SPIRAX G 80W- 90
2 SHELL SPIRAX G 90
3 SHELL SPIRAX A 85 W- 40
4 SHELL SPIRAX A 90
5 SHELL SPIRAX A 140

Pertamina

PERTAMINA

MESRAN 10W, 20W.

MESRAN 30.

MESRAN 40, 50.

MESRAN SUPER 20W- 50.

MESRAN PRIMA XP 20W- 50.

MESRAN B 30, 40, 50

MESRANIA 2T 0B.

MESRANIA 2T SUPER.

RORED EP- A 90.

RORED EP- A 140.

RORED HD- A 90.

RORED HD- A 140.

RORED MTF 80W- 90.

GANDAR 800

KOMPEN 15, 32.

KOMPEN 46, 68, 100.

MEDITRAN 30.

MEDITRAN 40.

MEDITRAN 50.

MEDITRAN P 10W.

MEDITRAN P 30, P 40

MEDITRAN P 50.

MEDITRAN S 10W.

MEDITRAN S 30.

MEDITRAN S 40.

MEDITRAN S 50.

MEDITRAN SC 15W- 40.

MEDITRAN SX 15W- 40.

MEDITRAN SX 15W- 40 CI 4

MEDITRAN SX 15W- 40 CI 4 PLUS.

MEDITRAN SMX 40.

MEDRIPAL 3, 4, 5

MEDRIPAL 2

MEDRIPAL 6

MEDRIPAL 308, 408

MEDRIPAL 311, 411

MEDRIPAL 312, 412, 512

MEDRIPAL 320, 420.

MEDRIPAL 330, 430

MEDRIPAL 340

MEDRIPAL 440

MEDRIPAL 540

MEDRIPAL 570

SEBANA P 9

SEBANA P 22, P 32, P 46

SEBANA P 68, P 100

SEBANA P 150

SEBANA P 220/ 320

SEBANA P 460

Hollow Sucker Rods

Hollow Sucker Rods

Technical Characteristics
maximize well performance in Progressive Cavity Pumping
applications, Hollow Sucker Rod Series is
ideally suited for working under high torque
loads, offering more fatigue resistance than
conventional rods.
Hollow Sucker Rod Series rods have box-box
ends that connect between each other via
pin-pin nipples.
Hollow sucker rod is featured by high
strength, bearing high load, keeping the
pressure of pouring medium and avoiding
leakage etc. Through the channel, the rods
can be filled with diluents, preservative and
hot oil to reduce oil viscosity and enhance
well efficiency.
It is designed for moderate to heavy loads in
non corrosive or effectively inhibited wells,
and also applied to sand wells.
HANDLING AND OPERATIONS
As Hollow Sucker Rod Series are manufactured
from seamless steel pipes, they can be run in a
similar way and using the same type of equipment
as regular tubing. No special elevator or rig
specifications are required.

API sucker rods

API sucker rods
ranging from 5/8” to 1 1/4”, with
lengths of 25 or 30 feet, manufactured
according to a rigorous quality
assurance system that complies with
ISO 9001:2008 and API standards.

GRADE C
Designed for wells with low and medium
loads, non-corrosive or effectively inhibited.
Manufactured in 1530 Mod. steel.

GRADE D CARBON
Designed for non-corrosive or effectively
inhibited wells with moderate loads.
Manufactured in 1530 Mod. Micro alloy
steel.*

GRADE K
Designed for low and medium loads in
corrosive wells where inhibition is
recommended. Manufactured in AISI 4621
Mod. steel.

GRADE KD
Designed for corrosive wells where
inhibition is recommended, with moderate
loads. Manufactured in AISI 4320 Mod.
steel.

GRADE D ALLOY
Designed for moderate to high loads in
non-corrosive or effectively inhibited wells.
Manufactured in AISI 4142 steel.

Drill Pipes

Drill Pipes
Description:
Standard: API 5D
Size: 60.3 ~ 168.3mm
Grade: E75, X95, G105, S135
Main feature:
A. The drill rods comply with
the provisions of API SPEC 5D & API SPEC7.
B. The grade of steel are determined according to the requirements of Group 1 & Group 3 of API
SPEC 5D.
C. Drill pipe joints at the same level comply with the provisions under the Standard API SPEC 7.
D. Internal Coating & Hard-banding.

Seamless Steel Pipes

Seamless Steel Pipes

Description:
Seamless steel pipe for liquid transport: Applicable to transport liquid, gas, oil etc
Mechanical seamless steel tubing: Applicable to the general structure, mechanical structure with
seamless steel tubes
Standard:
GB/T8162, GB/T8163, ASTM A53 , ASTM A106 ,DIN1629 ,
API 5L
Steel Grade:
GB/T8162, GB/T8163:10#, 20#, 35#, 45#, 16MN(Q345B)
ASTM A53 GR. A, GR. B, GR. C
ASTM A106 GR. A, GR. B, GR. C
DIN 162 St 37.0, St 44.0, St 52.0
API 5L A B X42,X46, X52, X60, X65, X70, X80

API 5L Line Pipe

API 5L Line Pipe

Description:
1. Material: API 5L line pipe : Gr. A, Gr. B, X-42, X-46,X-52,X-56,X-60
2. Diameter range: 32mm-508mm
3. Wall thickness: 1mm-12mm
4. Length: fixed length or random length
5. Standards: B/T 9711 /ASTM A 53/ ASTM A 106
6. Application: generally conveying fluids, oil or gas or water
7. Surface treatment: BE 3PE 3PP

API Casing Pipes

API Casing Pipes

Description:
Catalog: Oil Pipes, API 5CT Steel Pipe, J55, K55, L80,
N80Q,C90,T95,P110 Oil/Petroleum Casing Pipe, OCTG
1) Grade: J55,K55,L80,N80Q,C90,T95,P110
2) Size: 4 1/2", 5", 5 1/2", 6 5/8", 7", 7 5/8", 9 5/8", 10
3/4", 13 3/8", 16", 18 5/8", 20"
3) Wall thickness: 6.35 - 12.70 mm
4) Thread type: STC, LTC, BTC
5) Length: R1, R2, R3
6) All our casings accord with API 5CT standard, and we get the right to use the API 5CT LOGO

CASING

CASING

Cpig O.D., in.                                                                                                                                                                                            Make-up Loss Multiplication FactorsA
	STC	LTC	BTC	LTC	Reg	SpCl	STC	LTC		BTC		STC	LTC	BTC	R2	R3	R2	R3	R2		R3
4 1/2	6.250	7.000	8.875	5.000	5.000	4.875	8.05	9.07		10.11		3.625	4.000	4.938	1.0073	1.0055	1.0083	1.0062		1.0109		1.0082
5	6.500	7.750	9.125	5.563	5.563	5.375	10.18	12.56		12.99		3.750	4.375	5.063	1.0076	1.0057	1.0094	1.0070		1.0113		1.0085
5 1/2	6.750	8.000	9.250	6.050	6.050	5.875	11.44	14.03		14.14		3.875	4.500	5.125	1.0080	1.0060	1.0097	1.0073		1.0114		1.0086
5 3/4		9.375			6.375			15.49					5.188							1.0116		1.0087
6 5/8	7.250	8.750	9.625	7.390	7.390	7.000	19.97	24.82	24.46		4.125		4.875	5.313	1.0087	1.0065	1.0108	1.0081		1.0120		1.0090
7	7.250	9.000	10.000	7.656	7.656	7.375	18.34	23.67	23.22		4.125		5.000	5.500	1.0087	1.0065	1.0111	1.0083		1.0125		1.0094
7 5/8	7.500	9.250	10.375	8.500	8.500	8.125	26.93	34.23	34.84		4.250		5.125	5.688	1.0090	1.0068	1.0115	1.0086		1.0130		1.0098
8 5/8	7.750	10.000	10.625	9.625	9.625	9.125	35.58	47.48	45.94		4.375		5.500	5.813	1.0094	1.0070	1.0125	1.0094		1.0134		1.0100
9 5/8	7.750	10.500	10.625	10.625	10.625	10.125	39.51	55.77	50.99		4.375		5.750	5.813	1.0094	1.0070	1.0312	1.0099		1.0134		1.0100
10 3/4	8.000		10.625	11.750	11.750	11.250	45.53		56.68		4.500			5.813	1.0097	1.0073				1.0134		1.0100
11 3/4	8.000		10.625	12.750	12.750		49.61		61.74		4.500			5.813	1.0097	1.0073				1.0134		1.0100
13 5/8	8.000		10.625	14.375	14.375		56.23		69.95		4.500			5.813	1.0097	1.0073				1.0134		1.0100
16	9.000		10.625	17.000	17.000		78.98		87.56		5.000			5.813	1.0111	1.0083				1.0134		1.0100
18 5/8	9.000		10.625	20.000	20.000		118.94		138.03		5.000			5.813	1.0111	1.0083				1.0134		1.0100
20	9.000	11.500	10.625	21.000	21.000		98.25	126.74	110.33		5.000		6.250	5.813		1.0083				1.0134		1.0100

GRADE	Outside Painted		GRADE	Outside Painted
H-40	Black		C-95	Brown
J-55 or K-55	Green		P-110	White
N-80	Red		L-80	Red / Brown Band
			V-150	Purple

Crossover Combination/Reducing Tubing Couplings
Size	Weight Each	Size	Weight Each	Size	Weight Each	Size	Weight Each
2 EUE x 2 Reg	5	2 1/2 EUE x 2 1/2 Reg	7	3 EUE x 2 Reg	15	4 Reg x 3 Reg	10
2 1/2 Reg x 2 Reg	5	3 Reg x 2 Reg	11	3 EUE x 2 EUE	14	4 Reg x 3 EUE	12
2 1/2 Reg x 2 EUE	5	3 Reg x 2 EUE	11	3 EUE x 2 1/2 Reg	16	4 EUE x 3 Reg	11
2 1/2 EUE x 2 Reg	8	3 Reg x 2 1/2 Reg	10	3 EUE x 2 1/2 EUE	15	4 EUE x 3 EUE	11
2 1/2 EUE x 2 EUE	8	3 Reg x 2 1/2 EUE	10	3 EUE x 3 Reg	13	4 EUE x 4 Reg	10

TUBING

TUBING

Coupling Dimensions, Weights and Make-Up Loss Factors

Manufactured in accordance with APSCT

TUBING

Cpig O.D., in.                                                                                                                         Make-up Loss Multiplication FactorsA
P i p e Size	Cpig Length, In.				EUE		NUE		BTC		Cpig Weight, lbs.				Cpig “J” FactorB, in.			EUE		NUE		BTC
	EUE		NUE	BTC	Reg	SpCl			Reg	SpCl	EUE		NUE		EUE	NUE	BTC	R1	R2	R1	R2	R1	R2
2 3/8		4.875	4.250	8.500	3.063	2.910		2.875	2.875	2.700		3.42	2.82	5.46	2.938	2.625	4.750	1.0073	1.0054	1.0062	1.0045	1.0161	1.0107
2 7/8		5.250	5.125	8.500	3.668	3.460		3.500	3.500	3.220		5.27	5.15	8.14	3.125	3.063	4.750	1.0080	1.0059	1.0078	1.0058	1.0161	1.0107
3 1/2		5.750	5.625	8.500	4.500	4.180		4.250	4.250	3.865		9.02	8.17	11.74	3.375	3.313	4.750	1.0090	1.0066	1.0087	1.0065	1.0161	1.0107
4		6.000	5.750	9.000	5.000			4.750	4.750	4.400		10.62	9.57	14.17	3.500	3.375	5.000	1.0095	1.0070	1.0090	1.0066	1.0172	1.0114
4 1/2		6.250	6.125	9.500	5.563			5.200	5.200	4.920		13.31	10.76	15.72	3.625	3.563	5.250	1.0099	1.0074	1.0097	1.0072	1.0183	1.0121

Perforated Pup Joints

Perforated Pup Joints

Perforated Pup Joints

Available with standard or special perforation size and spacings. Each joint has four rows of 3/8 inch holes drilled longitudinally along the
tube as standard. Optional patterns, hole size, and lengths furnished upon request.
Diameters: 3/4" through 4.5" nominal O.D.
Weights: Standard or Heavy Wall
Lengths: As required
Grades: J-55, N-80, N-80 Q & T, L-80, P-110, and special grades
Connections: EUE, NUE, Buttress, Premium, and T & C

Premium Tubing Pup Joints

 Premium Tubing Pup Joints
Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer
or authorized licensee.
Diameters: 3/4" through 4.5" nominal O.D.
Weights: Standard or Heavy Wall
Lengths: 2, 3, 4, 6, 8, 10, 12 ft. Standard
Grades: J-55, N-80, N-80 Q & T, L-80, P-110, and special grades
Connections : Premium threads available include Atlas Bradford, Baker Hughes, Hydril, Interlock, Kawasaki,
Mannesmann, NKEL, NKK, OECO, TKC, VAM and Tenaris

Pup Joint Options:		Special grades are available upon request including:
Custom Sizes Coating O.D./I.D. Bullet Nose Thread Form Perforations Combinations Threads	Special Markings Special Paint Magnetic Particle Special Thread Protection Third Party Inspection	S-95, 9 chrome, 13 chrome, 21 chrome, 310 stainless, 316 stain­less, 316L stainless, titanium, aluminum, exotic alloys

 
API Tubing Pup Joints

pup joints are manufactured from seamless mechanical tube. each piece is marked with a distinctive heat
number that is fully traceable. A complete range of sizes (1" to 4.5"), weights (standard or heavy wall), and grades (J-55, N-80, L-80, and P-110)
are commonly available from stock in 2', 3', 4', 6', 10', and 12' lengths. Other lengths are available upon request.

Pup Joint Options:		Special grades are available upon request including:
Custom Sizes Coating O.D./I.D. Bullet Nose Thread Form Perforations Combinations Threads	Special Markings Special Paint Magnetic Particle Special Thread Protection Third Party Inspection	S-95, 9 chrome, 13 chrome, 21 chrome, 310 stainless, 316 stain­less, 316L stainless, titanium, aluminum, exotic alloys

Company Profile

Company Profile

ABOUT THE COMPANY

largesupplier.com is official domain from UD. largesupplier.com is a trading company for Industries Company Supply to full-services Mining until Gasoil service operations. also specially helping peoples and organization in material industry needs, and share information, to improve the quality of their products and services.

In addition, largesupplier.com clients with a wide range of related services include: Services and Supply many varied products from world wide.

As a company, we are driven to continuously improve both the quality of the service products. Committed to offering products and services that meet the current and future needs of all our clients. While keeping the environment safe, in every community we serve.

COMPANY OBJECTIVES

To carry on the business in the field of supply chain management and services in all kinds of industries.

To provide our procure the provision by others of every and any service need want or requirement of any business nature required by any person, firm or company in or in connection with any business carried on by them.

To provide, operate and maintain client for Oil, Mining and associated industries.

OUR MISSION

To provide our customers with the best quality services we can provide without compromising our values and beliefs..

To become a professional leader in the area of Inspection and Certification Company, inline with Government standard policy

.
OUR VISSION

• To develop effective leadership with integrity.
• To Hire reputable, qualified employees.
• To provide quality service with quality products.
• To offer competitive and reasonable rates.
• To develop good relationships with our customers.
• To continually be developing new, innovative ideas to benefit our customers.